• USB Operating System Support: Windows 98 /
98SE / ME / 2000 / XP / Vista / Linux
• ISO11898 dual wire CAN Physical Layer
(TJA1040x2) compatible with Device Net and
CANOpen
• J2534 Compliant for CAN and ISO15765
• RP1210 Compliant for CAN and J1939
• CCP Protocol Hardware acceleration
• Supports listen-only operations
• Double Buffered CAN transmission
• Industry Standard 9-PIN D-Sub Connector Pin out
• Integrated 1 Meter USB Cable
• Transient and Reverse battery protected
• Green and Red LEDs indicate transmission or
reception of USB data.
• LED indicates transceiver power.
• Fully USB powered with option for external power
6-40V VDC compatible with 24V industrial systems.
• Isolated Transceiver Side Power Consumption
(typical): 15mA @ 14.4 VDC (maximum during bus
fault) 100mA @ 14.4 VDC
• On board Processing: 40 MIPS RISC based design
• 64 bit time stamping to an accuracy of 500 nanoseconds
for one channel, 5 microseconds for two
channel usage. Time stamp never overflows.
• Firmware: Field upgradeable design (flash
EEPROM)
• Vehicle Spy Trial Setup Tool for Baud Rates
• Graphical Bit Timing Tool
• CE Compliant
• Warranty: One year limited warranty
